How to change the Technics SL-1200 LED Pitch Control !!

*Easy to replace as well !!




Step One :


First remove the platter.

Step Two:

Remove screws and the dust cover.

This is SL-1200`s inside.





Red circle is part of Pitch Control.






Step Three :

Remove this the black connector from main board. ( *Carefully to pull it !! )







Step Four :

Secure the tonearm, and remove the 45 plug from your turntable. 

Always unplug your turntable before removing the platter. 

Flip it over and remove the 20 sum screws from the underside and remove the foot pads. 

The foot pads come off by turning them counter clockwise. 

Once they are removed you will notice there is another screw under each one. 

Remove that as well. Carefully pull the rubber base from the bottom of the turntable.

The pitch control on left side of the turntable.












Step Five :


Remove the two screws holding the pitch housing and circuit board down located.







Step Six :


Removed the old pitch control and install the new one`s in reverse order !!








*Technics SL-1200 Blue LED Special / Pitch Control for MK2, MK3.



You can get from this store !!


Disclaimer: unfortunately I cannot be responsible for damages to your equipment as this is not a common rapier or service procedure.