Step One :
Secure the tonearm, and remove the 45 plug from your turntable.
Always unplug your turntable before removing the platter.
Flip it over and remove the 20 sum screws from the underside and remove the foot pads.
The foot pads come off by turning them counter clockwise.
Once they are removed you will notice there is another screw under each one.
Remove that as well. Carefully pull the rubber base from the bottom of the turntable.
The tonearm assembly is located upper left side of the turntable.
Step Two :
Remove the screws and insulater weight.
Don`t forget here !!
Step Three :
Flip it over after removed the 3 screws from the cabinet.
Step Four :
Removed the old tonearm and install the new tonearm in reverse order !!
*Description Cable*
*CANARE F10 ( Plugs )
*CANARE GS-6 ( instrument Cable )
A specially designed Oxygen Free Copper 18 AWG cable for connecting to amps, mixers, effects pedals and
all outboard signal processing gear.
Low capacitance and low series resistance provides improved frequency response (flat to 50kHz).
The proprietary double Carbon/Braid Copper shield construction eliminates microphonic handling noise,
especially on stage where amps are often set at maximum volume levels.
Highly recommend !! - Made in JAPAN -
*About CANARE*
CANARE manufactures the best in Pro Audio and Video Cable, 75 Ohm BNC, F and
RCA Connectors, Patchbays, Cable Reels, Snake Systems, Assemblies, Crimp Tools and Cable Strippers.
In 2004, CANARE launched a full Optical Product Line for HD upgrades in the broadcast market.
Professional broadcast engineers, sound technicians, A/V facility integrators,
design consultants and many leading OEM's rely on Canare's product, proven reliability and top notch customer service.
Optimize with Canare ...the Professionals Choice!
*You will get professional high quality sound !!
You can get From this store !!
Thank you very much.
Disclaimer: unfortunately I cannot be responsible for damages to your equipment as this is not a common rapier or service procedure.
0 件のコメント:
コメントを投稿